Find out how to set up a gasoline combi boiler. Step-by-step information of putting in a brand new Baxi platinum combo boiler. Together with flushing and putting in a fernox Omega filter. Find out how to set up a combi boiler.
At this time we’re working in Otley, close to Leeds, and we’re simply putting in a brand new combi boiler. We have a pleasant flat wall right here at this time, so we’re simply going to indicate you step-by-step how we do it.
The very first thing, and one of the vital essential issues, we defend the property.
We have his Baxi Platinum there. So that is the boiler that we’re putting in at this time. So simply going to open this up. Then once we open this, we’ll take a look there. We simply discovered the bag of all these hooks and issues and all of your fittings pack.
We have your jig in there, simply slides out. So should you can see there, all of the boiler remains to be within the field, so the boiler may be simply saved good and protected whereas we match the jig on the wall, after which simply mark all this out.
We have this laser stage right here, so we are able to simply stage the boiler up. One factor to level out with this, it should be put in by a Gasoline Protected registered engineer. If it is not put in by a Gasoline Protected registered engineer, then you’ll have no guarantee with the boiler, and additionally, you will, should you come to promote your property, you’ll not have the best certification that you will want to truly promote the property. At all times just remember to have it completed by a Gasoline Protected registered engineer.
We have not bought our automotive drill with us at this time, so what we have completed is we have simply stitched that. We have drilled lots of 6 mil pilot bits all the best way round for the flue. It is good and neat, is that.
We put the scraps again within the field, and we left the froth stuff within the backside, and now we are able to use that as a bin, maintain our garbage collectively. So we simply bought us caps to take out the underside of right here. Little bit of water popping out. These are examined earlier than they arrive out, so you must by no means have a defective one on instal, as a result of they’re going to all be examined. And now we’re simply going to take this cowl off, simply so it do not get bent.
So what we usually discover is these nuts on this again, that do not line up very properly, so you’ll be able to’t simply tighten them up. It will not go on. See there, they are not in line. So all that you must do, is, see the nuts on the again, simply slacken them nuts off, after which you’ll join it up very simply. So simply slacken them off, on the again of the valve. Then…
So we have linked all them on now, so now we are able to simply tip them all of them up, and simply tighten the again nuts again up. I all the time do that first earlier than I join any pegs to it, as a result of should you join the pegs it may be fairly awkward to get them to line up, so that is simply the best way that I do it.
So I simply linked the stress aid pipe, and should you see there, it is bent. So these all the time come twisted or bent on the, on the backs of boilers. So you’ll be able to, if you’d like, there’s a little bit grip screw there you’ll be able to simply undo that and you may straighten it up a little bit bit, or you’ll be able to simply attempt to bent this pipe a little bit bit. All the issues I’ve seen, I’ve seen individuals minimize this after which simply put a socket on simply to straighten it up by the one, so I’ve truly simply twisted the pipe a little bit bit.
So I simply drilled for the blow off now, and we simply go away that. We’re simply gonna put some non setting mastic in there. We do not need the copper to come back involved with the cement, as a result of the cement will corrode the copper over time.
So we’re simply completed with pipes now. So we have got this Fernox filter put in there, this Fernox, Omega filter, after which had been simply gonna do gasoline now.
So we have got the boiler up and working now, so we’re simply gonna examine the emissions, we simply bought a chem analyzer there, so we simply wish to examine that its working safely. We have additionally bought a flushing adapter on there, in order that’s flushing the system. With liner cleanse.
So we’re simply ending up now, so we have put in this Baxi, this Baxi Platinum. This Baxi Platinum comes with a 10 yr components and labour guarantee. We have additionally bought, we have put in a Fernox filter. So the Fernox filter comes with 25 yr guarantee. And we have additionally put, we have cleaned it out with Fernox F5, and we have additionally added a Fernox inhibitor F1 protector in afterwards so that may defend the system.
Thanks for taking the time to observe our video, Find out how to Instal a Combi Boiler.